电动遮阳帘系统包括多种产品，电动遮阳帘产品包括：FSS电动天棚帘、FCS电动天棚帘、FTS电动天棚帘和巨力折叠电动天棚帘。为能更详细了解电动遮阳帘的相应特性及相关知识，将就各类电动遮阳帘的运行描述及相关知识进行分别介绍。
The electric sunshade system includes various products, including FSS electric ceiling curtains, FCS electric ceiling curtains, FTS electric ceiling curtains, and Juli folding electric ceiling curtains. In order to gain a more detailed understanding of the corresponding characteristics and related knowledge of electric sunshades, the operation descriptions and related knowledge of various types of electric sunshades will be introduced separately.
FCS电动天棚帘
FCS electric ceiling curtain
运行描述
Operation Description
该系统包括传动机构、面料和控制器三个部分。传动部分的一端为动力端，利用管状电机旋转带动卷管及固定在卷管上的卷绳器旋转从而使一更钢丝绳进行收放。传动部分的另一端为固定的弹簧滑轮，传动钢丝绳通过滑轮进行换向，使一根钢丝绳的两端能同时固定在卷绳器上，并且钢丝绳始终保持绷紧状态。
The system includes three parts: transmission mechanism, fabric, and controller. One end of the transmission part is the power end, which uses a tubular motor to rotate and drive the coil and the rope winding device fixed on the coil to rotate, thereby enabling a steel wire rope to be retracted and released. The other end of the transmission part is a fixed spring pulley, and the transmission steel wire rope is reversed through the pulley, so that both ends of a steel wire rope can be fixed on the rope winding device at the same time, and the steel wire rope is always in a tight state.
面料从顶端开始安装横向联结杆，间距等分（缆接地箱 隔离墩模具 保定电动门 铜狮子 u型槽模具 SMT贴片焊接 收费岛模具 水泥井模具通常为 1m 左右）。联结杆上安装有滑轮，滑轮在固定钢丝上滚动。面料牵引杆与传动钢丝绳联结，在卷管（电机）带动下面料沿着固定钢丝绳展开、收拢。由于该机构张力较小，可选用普通卷帘面料。
Install horizontal connecting rods from the top of the fabric, with equal spacing (usually around 1m). A pulley is installed on the connecting rod, and the pulley rolls on the fixed steel wire. The fabric traction rod is connected to the transmission steel wire rope, and the coil (motor) drives the lower material to unfold and retract along the fixed steel wire rope. Due to the low tension of this mechanism, ordinary roller shutter fabric can be used.